na-t question

[brs86supra]

sorry if this has already been asked, but i know for the na-t i need everything off the turbo motor which encludes electronics but i was wondering. for the turbo oil feed and return lines where can i tap into for the feed line for the oil going to the turbo. i know that i can tap into the oil pan for the return line but where do i get the feed line from. and it would be very helpful if i could see some pics. thanks in advance and please no flamming.

 

[Sl1dewaysSupra]

The most consistant place to feed the turbo would be teeing off the oil pressure sending unit.

 

[brs86supra]

do u have a photo or know where i can find one of it. so i can see how its done.

 

[Sl1dewaysSupra]

I don't, it is just a BSP "T" fitting. Undo the oil pressure sending unit, install the fitting, run the line to the turbo and put the sending unit back on.

 

[Burntz]

one of the vendors sells a bit with the tee and correct fittings and everything