My Quick Extender Pro Review After 6 Months – Real Results and Honest Experience

powerdude

New Member
Jun 25, 2025
4
0
1
43
Hey guys

Wanted to finally drop my full review of Quick Extender Pro after using it for 180 days. I had so many questions before starting, and now that I’ve gone through it personally — I figured it might help others looking into it.

quick-extender-pro-best-penis-extender.jpg

I’ll go over:

  • What package I bought
  • What’s included
  • ️ Assembly & first use
  • My full 6-month routine
  • Issues I had and how I fixed them
  • ✅ Real results (+ measurement tracking)
  • ✍️ Daily journal and consistency tips
  • Pros & cons from my perspective

Step 1: Ordering the Device​

I ordered directly from the official site here with a 20% Discount!

After doing a LOT of reading, I knew I didn’t want to mess with sketchy resellers. Plus, they had a 20% discount and money-back guarantee, which helped me commit.

I chose the Deluxe Standard Edition for $349 with a 20% discount — not the cheapest, not the most expensive, but it had everything I felt I needed to do it right.

They also offer:

What Came in My Deluxe Package​

Here’s what was in the box (really solid packaging btw):
  • The full DSS system (Double Strap Support)
  • 4 elongation bars
  • 2 comfort pads + 2 extra silicone tubes
  • Memory foam pad for the base
  • Instructional DVD and manual
  • Travel case + spare parts
  • Measuring ruler
  • Set of alcohol wipes and gauze
It felt premium but practical — like they knew I’d actually be using it every day, not just unboxing it for show.


️Assembly & First Impressions​

best-penis-stretcher.jpg
First build took me maybe 20 minutes. Not because it was difficult, but because I kept watching the video and re-reading the instructions. Once I did it once, it became muscle memory.

I’ll be honest — the device looks a bit intimidating at first but once it's set up properly, it’s surprisingly comfortable. The Double Strap System (DSS) was a game-changer — way more secure and stable than cheap knockoffs I tried years ago.
Fitting it the first time took patience. I started small (just base + shortest rods), made sure the straps were snug but not choking circulation, and wore it for 1 hour max the first day.


Month-by-Month Routine (Newbie-Friendly)​

Month 1: Breaking In​

I treated it like the gym — start slow, stay consistent.
  • 1 hour/day for Week 1
  • 2 hours/day Week 2
  • 3–4 hours/day by Week 4
  • Always took breaks every 1–1.5 hours
  • Used baby powder under the straps to reduce pinching
  • Wrote everything down in a simple Google Sheet (time, tension, comments)
✅ No rush, no tension-maxing. Just focus on consistency.


Months 2–3: Building Consistency​

  • 4–5 hours/day minimum
  • Gradually added tension using longer bars
  • Switched from cloth wrap to gauze wrap under the straps = comfort boost
  • Tried wearing it under loose pants while working from home ‍
By the end of Month 3, I started seeing noticeable stretch during warm-ups. Not full results yet, but it felt like my body was adapting.


Months 4–6: Real Progress​

  • 6+ hours/day regularly
  • Reached medium-high tension range
  • Took weekends off sometimes for rest
  • Introduced light massage + heat pad after sessions
  • Added 0.5 inch in measured stretched length (BPEL) by day 150
  • At day 180, my final gain was +0.9 inches in stretched length
⚠️ Warning: You MUST listen to your body. Over-tension or rushing = discomfort.


✍️ How I Tracked Progress​

I built a basic spreadsheet to log:
  • Date
  • ⏱️ Session time
  • ⚙️ Tension level
  • Notes (comfort, irritation, pressure points)
Once a week I’d measure my stretched length — always at the same time of day, standing up, after a short warm-up.

It helped me stay motivated and made it feel like a real program instead of just “using a device.”


Problems I Had (and Solved)​

  1. Strap pressure behind the head
    ✅ Solution: Switched to double-layer gauze wrap + adjusted positioning

  2. Slipping during longer sessions
    ✅ Solution: Cleaned silicone with warm water, dried skin fully, applied powder

  3. Fatigue after 5+ hours
    ✅ Solution: Broke daily use into 2–3 sessions (2h morning + 3h evening)

  4. Skin irritation after sweaty sessions
    ✅ Solution: Wipes + small dab of aloe gel after removing device
It’s not all sunshine — but everything is solvable if you stay patient and adjust.


Final Results at Day 180​

  • +0.9 inches in stretched length
  • +0.6 inches girth while flaccid (bonus!)
  • Better straightness and angle
  • More confidence overall
  • Routine feels like a habit now, not a chore
Honestly, I thought this was going to be some hyped-up gadget — but it turned out to be one of the most practical long-term tools I’ve ever tried.


✅ Pros & ❌ Cons​

Pros:
✅ Easy to assemble and adjust
✅ DSS strap system = best support I’ve tried
✅ Quality materials and durable frame
✅ Solid results with consistency
✅ Great for working from home or low-key daily use
✅ Backed by medical traction science
✅ Good support + guides

Cons:
❌ Not exactly invisible under tight clothes
❌ You NEED patience — results aren’t instant
❌ Skin conditioning and breaks are important to avoid irritation
❌ Measuring progress can get obsessive


Final Thoughts​

If you're serious about improving size or correcting curve without surgery or pills — this is honestly one of the best tools out there.

It takes commitment. But Quick Extender Pro gives you everything you need to succeed if you just show up daily and track your work.

Start with a reliable package (I recommend the Deluxe Edition like I got), and don’t skimp on comfort — it makes all the difference.

Here’s the official link where I bought mine with a 20% discount

If you’re dealing with curvature or Peyronie’s, they also have a full edition just for that.


If you’re thinking of starting, let me know — happy to answer questions or show you how I structured my logs. This thing really works if you respect the process.
 
Last edited: