i know this has been answered 1000 times before, 1jz fly wheel and 7mgte clutch set up. but can you just purchase a full 1jzgte clutch kit? im planning on going with a spec super twin and i don't believe you can buy just the fly wheel. ordering it today hopefully!
mkiii 2jzgte with r154. clutch set up?
- Thread starter bigshooter44
- Start date
So your question is if anyone sell a 1jz set up ?. Or a 1jz flywheel? 7m flywheelwill not fit a 1jz. But the clutch will.
And their are company's that sell 1jz flywheels. I know that comp clutch sells a full kit stage 4. But I don't know about spec for the flywheel. A twin set up should come with a flywheel
I was running a spec stage 3 and I loved it it held very well I was putting 430whp to it. Let use know how well the twin disk works. Maybe do a little write up on install..
And their are company's that sell 1jz flywheels. I know that comp clutch sells a full kit stage 4. But I don't know about spec for the flywheel. A twin set up should come with a flywheel
I was running a spec stage 3 and I loved it it held very well I was putting 430whp to it. Let use know how well the twin disk works. Maybe do a little write up on install..
not quite, every swap thread says to use a 1jz flywheel because of the 8 bolt pattern and a 7mgte clutch set up. But with the twin plate it comes with the flywheel and clutch. So i guess my question would be, can i purchase the 1jz clutch kit for my 2jzgte/r154? and i will write up a little review when i get her running in the spring!
heres the kit i was looking at
http://kspecracing.com/spec_clutch/spec_multiplate_clutch_kit_super_twin/st63sst2/i-304207.aspx
heres the kit i was looking at
http://kspecracing.com/spec_clutch/spec_multiplate_clutch_kit_super_twin/st63sst2/i-304207.aspx
IF your going to use a twin disk they come with the flywheel and has to be 1jz specific kit if using the r154.