master power t-70

ModularTurbo

MasterPower Rep
May 4, 2008
128
0
0
Homestead, FL
www.modularturbo.com
drewgo;1267832 said:
I get them directly from the distributor down here in South Florida.
The owner's name is Mike (Mike's Turbo). Alot of us use them.
I've used them and they are in my opinion the best bang for your buck.
Also they are robust turbos so they'll last as long as top name brands.
I put together a 240/1jz with a 63-1 MP and made 413rwhp @ 17 psi and
it spools quick. Can't beat that for $550 turbo.

Mike Turbo is no longer an Authorized Dealer. He hasn't been for some time now.
 

Jostar

AEM powered 1JZGTE!!!
May 21, 2007
746
0
0
43
Chicago
ModularTurbo;1268049 said:
Mike Turbo is no longer an Authorized Dealer. He hasn't been for some time now.

Can you hook me up with the O-ring that goes on the Compressor housing??? Mine ripped When i took the compressor housing off..
 

OneJSupra

I'm a sleeper ...
Feb 9, 2007
900
0
0
Supraland
ModularTurbo;1268325 said:
sure just call me 2morrow sometime before 4

Rob, my T61 is still boosting like crazy but I want to go bigger turbo (like 74mm bigger) this summer now that I have bigger injectors so I might hit you up to see what you got.

-Andy
 

Jostar

AEM powered 1JZGTE!!!
May 21, 2007
746
0
0
43
Chicago
suprafanatic;1284743 said:
How would a masterpower T-70 with a .96 housing respond on a built 7M? anyone use this set up or have any dyno numbers?

That would be too laggy, Get a .68ar, There is people making very nice power on this turbo...
 

Jostar

AEM powered 1JZGTE!!!
May 21, 2007
746
0
0
43
Chicago
ModularTurbo;1286564 said:
+1 I said the same thing to him in a PM, but he has to have the .96
You can lead a horse to water.........

Atleast a .81ar... but a .96ar?? On my 1jz the T70 spools around 4-4.5K RPMs on full kill.... Scary!!!!!:aigo::evil2:
 

a_sesshoumaru

Suprita
Jan 7, 2007
455
0
0
El Salvador
Jostar;1285596 said:
That would be too laggy, Get a .68ar, There is people making very nice power on this turbo...
I think .68 is to restrictive past 18psi, 0.81 housings are hard to find used but should work perfect, and i dont think that with a .96 you would see more than 18psi. The problem is that the center is too heavy. But still a very good, reliable and good priced turbo.

Any one is running a 0.96 housing with his T70? please step in and tell us, video if posible.

EDIT: this is a T70 A/R 0.68
http://www.youtube.com/watch?v=VqJ951PSiVE&feature=channel_page
 

Jostar

AEM powered 1JZGTE!!!
May 21, 2007
746
0
0
43
Chicago
a_sesshoumaru;1287030 said:
I think .68 is to restrictive past 18psi, 0.81 housings are hard to find used but should work perfect, and i dont think that with a .96 you would see more than 18psi. The problem is that the center is too heavy. But still a very good, reliable and good priced turbo.

Any one is running a 0.96 housing with his T70? please step in and tell us, video if posible.

EDIT: this is a T70 A/R 0.68
http://www.youtube.com/watch?v=VqJ951PSiVE&feature=channel_page



I doubt the .68ar is restrictive, My close friend made 702hp at the wheels on his evoII.... Ran a 10.42@142mph.... 27 libras?? las subiste??
 

a_sesshoumaru

Suprita
Jan 7, 2007
455
0
0
El Salvador
Jostar;1287035 said:
I doubt the .68ar is restrictive, My close friend made 702hp at the wheels on his evoII.... Ran a 10.42@142mph.... 27 libras?? las subiste??
On a 2.0L engine is not restrictive at all, but in a 3.0L 6 cil, i think it is, unfortunalty i did it and the engine didn`t last long to shot another video. Too high egts
 

Jostar

AEM powered 1JZGTE!!!
May 21, 2007
746
0
0
43
Chicago
ModularTurbo;1297860 said:
no T4 divided available sorry

Hey Rob, Post pics of the MP GT42 & MP GT45, The pics on your site kinda sux... I want see the difference between the T70 & T76, GT42 & GT45... I am interested in one of the GT ones..