many codes and really no problems....

[sleepersupra]

ok i got a few codes just checking the car out and was looking for some opinions...and if anyone has a pic of where these sensors are just to double check myself that would be great

22-water temp sensor signal-i looked a tgetting one but both times i got it, it was the wrong one.

24-intake air temp sensor signal-replaced my filter w/ a K&N

31-air flow meter signal- i just replaced my filter w/ a K&N

32-HAC sensor signal- on this one i have the sensor plugged in so i don't know whats going on

 

[Bishop92t]

http://www.ma70.com/bishop92t/techtips/7mlayout.jpg

The water temp sensor for the ECU is just below the turbo water line and charcoal VSV.

Intake air temp sensor is built into the AFM.

HAC is built into the ECU unless you have an 87 or possibly an early 88.

You might want to think about reducing the size of your sig. It's quite tall.

 

[sleepersupra]

http://www.ma70.com/bishop92t/techtips/7mlayout.jpg

The water temp sensor for the ECU is just below the turbo water line and charcoal VSV.

Intake air temp sensor is built into the AFM.

HAC is built into the ECU unless you have an 87 or possibly an early 88.

You might want to think about reducing the size of your sig. It's quite tall.

thanks, for the info, and my sig is a bit smaller now.....