as the title says I'm lookin for a someone local to rebuild a 7mgte engine. I've slowly accumulated all the parts I wanted to get the engine built, just wondering if anyone has experience with a shop that rebuilt their 7mgte. Specifically a shop with a torque plate. Also not sure what thickness metal headgasket to get, but I assume the machine shop would be able to recommend one.
JE pistons +.040 8.2:1 with chromoly rings
Eagle rods with arp bolts
BC 272 cams
BC oversized valves and springs
ARP head and main studs
billet main caps
JE pistons +.040 8.2:1 with chromoly rings
Eagle rods with arp bolts
BC 272 cams
BC oversized valves and springs
ARP head and main studs
billet main caps