OK guys, I need to get some new guages, I have a couple of autometer gauges and would like to replace them with some that data log. My goal would be to get a 60mm gauge and place it where the water temp goes and get 2 52mm gauges where the stock boost and oil pressure goes.
My choices are the PLX 100 and 200 series gauges because they can show more than one input at a time and have future data logging. This way I wouldn't have anything on the A-Pillar.
http://www.plxdevices.com/products/dm200/
The Zeitronix set up will allow you to datalog, I just don't know where to put the display, most likely the ashetray. Then get some prosport gauges to put in the stock cluster.
http://zeitronix.com/index.html
http://prosportgauges.com/premium_series_peak_warning_gauges.aspx
Or am I just over thinking it? I would just like to be able to to see what my afr's at what boost and rpm as well as what my oil pressure and egt's are at the same rpms. It seems both of these will do this, just the PLX's data logger doesn't come out til november which is fine.
Thanks
My choices are the PLX 100 and 200 series gauges because they can show more than one input at a time and have future data logging. This way I wouldn't have anything on the A-Pillar.
http://www.plxdevices.com/products/dm200/
The Zeitronix set up will allow you to datalog, I just don't know where to put the display, most likely the ashetray. Then get some prosport gauges to put in the stock cluster.
http://zeitronix.com/index.html
http://prosportgauges.com/premium_series_peak_warning_gauges.aspx
Or am I just over thinking it? I would just like to be able to to see what my afr's at what boost and rpm as well as what my oil pressure and egt's are at the same rpms. It seems both of these will do this, just the PLX's data logger doesn't come out til november which is fine.
Thanks
