Look at what my car is getting next! PICS!

[suprarich]

Finally done and ready to install in my car. SIP 9mm lift 5160 billet steel cams.
265 duration not including the ramp. 234 degree duration at .050 valve lift. Induction heat treated, ground, then ion plasma nitrided. Should make some good power.

 

[upgradedsupra]

Sweet! Where did you get your billet's? Same place as mine? They are similar spec to mine.

Duane

 

[yaitsme]

:drink1:

 

[Poodles]

I thought you where resisting putting them on your car? Guess they looked too good just sitting there...

 

[tissimo]

need them in before fl

 

[suprarich]

Whats up Duane? I thought your cams to be bigger specs then mine. We cut a set of cams down untill they spun safely in a head and then used the profile to make these. These will be drop in with no issue. You should see the cam card these put out. Really aggressive lobe center and valve timming.
They will be really grumpy if I get crazy with the cam gears.

 

[suprarich]

Poodles - I might as well put them in my car, i don't know who I will get to buy them at 1450.00 bucks.

Tissimo - I won't need them for Florida:biglaugh:

 

[OneJoeZee]

What are they for? Are you going to play the drums with those?

 

[tissimo]

Tissimo - I won't need them for Florida:biglaugh:

hahaha! cant wait, should be fun.. to bad my car isn't ready

 

[suprarich]

What are they for? Are you going to play the drums with those?

Bump stick, drum stick, all the same!

 

[upgradedsupra]

Whats up Duane? I thought your cams to be bigger specs then mine. We cut a set of cams down untill they spun safely in a head and then used the profile to make these. These will be drop in with no issue. You should see the cam card these put out. Really aggressive lobe center and valve timming.
They will be really grumpy if I get crazy with the cam gears.

I love the lumpy idle even with my cam gears adjusted. :biglaugh: Get a video when it is up and running!

Duane

 

[CampbellsChunkySoupra]

yumyy. they look very nice!