Location of washer in gear box R154

[Matthieu]

Hello,
i'm french and new on this forum. Owner of a toyota supra mk3 turbo 7MGTE with R154 of 1990.
i need your help. i have a washer (Below has left of the photo) His dimensions are: 37mm x 25mm x 3,5mm of memory


I do not manage to remember where it go!!
can you help me
Thanks to all

 

[525gte]

Looks like 1st gear thrust washer

 

[Matthieu]

Thanks you 525gte.
My box is assembled, gear on shaft.
But I am going to try to look this after noon.
Otherwise I go etre obliged to put down again the rotations of shaft
I have a doubt on the pine nut of the first gear.

 

[Matthieu]

Further information, here is the measures of the quotations of shafts
sorry how can i do to post a picture

The slice is as this
Thickness:3,5mm
internal diameter:25,1mm
outside diameter:36,6mm

 

[Matthieu]

Nobody can help me?
Nobody opened his R 154?

 

[525gte]

I am not clear on the question. I have a book here I might be able to look it up if I know what your asking. Is it the thickness of the washer your needing?

 

[Mr Bojangles]

I disassembled and rebuilt mine myself, if you have this link it's easy http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=MT&P=50

 

[Matthieu]

Not exactly 525gte, i need to know where is placed the slice?!?
Mr Bojangles, Thank you for the link. The documentation does not show this slice. I do not understand where it can go.
It is where is my problem.
Thanks to you to help me.
To toyota France, he sends back to me towards a concession.
In concession, him do not know.:icon_eek:
i really need you:1zhelp:

 

[525gte]

Oh location of the 1st gear thrust washer

 

[Matthieu]

I put in the afternoon (for France) photos to be better understood. I am sorry about my bad language

 

[Matthieu]

Some photos to understand better what I try to say to you.
B.Plastic slice.
A.Slice with blocking by a ball.


A.Slice with blocking by a ball.


Measure physics on output shaft


Measure physics made on trees and slice in more unknown.


I hope that it facilitates you the understanding of the problem

 

[525gte]

Ok in the 1st pic I think your asking where the plastic slice\peice goes. And it is the spacer in this pic

am I getting closer to helping you?. Pm me your email and I will send you all the info in the book I have tomorrow

 

[Matthieu]

525gte, mp sent

 

[Matthieu]

I found, that's it, I found.:biglaugh::: angry :::evil2:
In fact, it is curious, it is a R154 with a slice at the end of counter gear just before the bearing and the snap boxing ring. like a W58. Curious

Grace in your invaluable help, in looks for make on the Internet and a documentation lent by an enthusiast of toyota, it is in the box.:drink1::bigthumb:
It does not more remain than to go back up the whole and to drive.
Still one thank you for your help and your passion for above.:wav:: dothewave ::

 

[Matthieu]

On monday, i show to you the R 154 rebuilt
The place were it go.

next post last week :biglaugh::evil2::: angry :::aigo::nono:

 

[525gte]

glad you got it sorted out.

 

[Matthieu]

I am at present in the course of rectification of my error

 

[Matthieu]

After removal of the bearing, it is about the old slice of the old bearing. That of lost time it is better to be far-sighted rather than to notice a problem once the rested gear box.

 

[Matthieu]

That makes sulky