this past weekend i put on my new rotors, pads and ss brake lines. eveything went well except for the drivers side front brake line. when i took off the hard line by the fender well, it had been tightened down too much before and flared the fitting soo much it wouldnt fit into the new SS line. so i finally got it to fit after alot of swearing and what not. then of course it leaks now! it is leaking out from between the fitting and the line. not around the threads. i figured this line would be short since the master cyl is right there. of course it is not. i was wondering if anyone has had to repair/replace that line before and where they got the parts. atleast my work is real real close and only one stop sign. i drove past 2 days using the e-brake. any help asap would be great. thanks-
