Installed FCD now car won't start

[AGlobalThreat]

I just installed an HKS FCD on my 1jz.

Used this ECU pinout

The install went smoothly I didn't think I would have any problems, yes I disconnected the neg cable before installing.

Is that diagram correct? That's exactly how I installed it.

It cranks over plenty of battery power but doesn't start

I'm looking at the FCD box (Trying to decipher japanese) and noticing it says K3 on the box and K3 next to MA70, but next to JZA70 it says STD. I thought the 1jz WAS K3 I installed the green wire to the RPM signal. Do I have the wrong FCD?

Edit: Uninstalled it and car started first try. ****

 

[mkIIIman089]

Sounds like the wrong one to me.

 

[MK3Brent]

If that diagram is incorrect, which I'm unfamiliar with JZ's... you may have tapped an IGN wire and you're not getting spark now.

 

[starscream5000]

Just checking, but you do know what a FCD does right? Just make sure you have enough fuel for it...