I bought a R154 tranny with the MT ecu. I need to know if the driveshaft fits? and what about the transmission cooling systeme. I want to change my radiator to, for an aluminium rad. When they sold it they mension the transmission. So do i have to care with ? and i speak french so sorry for my bads in english Thank you
I'm swaping my AT to a MT, need info
- Thread starter peer648
- Start date
Your driveshaft will not work, however you only need to change the front half. Get one from an R154 supra and your good. As far as the radiator, the AT Has an auto trans cooler in it. If you didnt buy it yet buy one for the MT. If you did its no big deal. Just cap off the tranny fluid inlet and outlet on the rad.
driveshaft doesnt fit, m/t is not cooled so you can rip all that out, I did this swap a few months ago. It doesnt require much, just common sense and a skinny arm to get those bellhousing bolts
Yea I'm in the midst of swapping motor/trans. You need a different driveshaft. Make sure you get one for an R154 like Lewis said and not a W58 driveshaft. The shaft from the w58 won't fit the r154 and viseversa.
just the front section....the rear sections are the same....but who sells half a driveshaft lol...other than me?
peer648;1525950 said:
It still has to be for the correct transmission or else the shaft won't fit into the back of the transmission and could be a bit too short.
Try Shaftmaster. They are in the Misc Vender Archives. Good price on alum DS.
EDIT : http://www.supramania.com/forums/sh...sters-Inc-Driveshaft-manufacturing-and-repair
EDIT : http://www.supramania.com/forums/sh...sters-Inc-Driveshaft-manufacturing-and-repair
Last edited:
