History: I developed a slight knock at 2500+ RPM in my bottom end last week, pulled the motor and got the bearings out today. My #2 rod bearing shows signs of oil starvation. Doesn't look like I let it go long enough to damage anything I can barely feel the grooves on the bearing with my fingernail, and can barely notice anything on the crank.
I've decided Im going to take the crank down to get it resized for clevites and micro polished. I'd like to get the rods shot peened and have ARP bolts installed as well.
tl;dr
So:
Resize the crank for clevites
Micropolish
Shot peen
Install new rod bolts
Can anyone tell me what I should be looking to pay?
Anything else I should get done to the bottom while I'm down there?
I've decided Im going to take the crank down to get it resized for clevites and micro polished. I'd like to get the rods shot peened and have ARP bolts installed as well.
tl;dr
So:
Resize the crank for clevites
Micropolish
Shot peen
Install new rod bolts
Can anyone tell me what I should be looking to pay?
Anything else I should get done to the bottom while I'm down there?
