Greddy RS help

[Freshmaker]

I can't get my BOV to make much of a sound

My setup is:
1JZ at stock boost
BOV is about 8" from the TB and vented to atmosphere
Vacuum line is hooked up to the intake manifold

The BOV came with the car, but it wasn't installed. The adjustment screw was all the way off. So I put the screw and nut in the BOV. Then, I have tried it at about 1/2 and all the way loose. I havn't driven the car more than a couple miles, but I get no BOV noise. I really don't want to stress my fragile ct12a's...

 

[MK3Brent]

Is it letting air out of the pipes?

 

[Freshmaker]

I don't think so. Wouldn't I hear a noise if it was?

 

[MK3Brent]

Small boost = small sound.

As long as you're not surging, I wouldn't worry about it.

 

[AF1JZ]

Is it the real greddy one or an ebay one. Because i have the ebay one and it just stopped working. So, I need to get a real one. I'm just using the stock one again. GAY!!!

 

[gilberjj]

ive got the real one, and it used to whoosh at 9is lbs, now it flutters at 16is pounds. it should definetly make some sound though. maybe take it apart, and make sure you can compress the spring. its real hard, but it can be done.

 

[Freshmaker]

It says Greddy RS, thats about as much as I know about it lol.

Gil, could you measure how much of the black set screw is sticking out of the housing? Just to give me a place to start