exhaust drone and sputtering after 4krpm on boost

superspeed

New Member
Apr 13, 2008
15
0
0
Edmonton
My car set is currently:

ct26 57 trim turbo
intake
3inch dpp and 3 inch straight pipe to a hks dragger muffler
everything else stock afm and injectors


1st question:

how do i get rid of exhaust drone? would a high flow 3 inch magnaflow cat work or do u guys have other suggestions?

2nd question:

when i am boosting after 4k rpm it starts to stutter alot(like a put put put put sound) but it will keep going all the way to 6krpm is this a spark issue? i currently have autolite 5503 and i belived gapped to about .032 should i lower it to .030?
 

hvyman

Dang Dude! No Way Man.
Staff member
Apr 17, 2007
12,568
1
38
Fullerton,CA
Resonator would be your best bet to keep the drone down.


Get rid of the autolites and get some ngk coppers which are 2$ each.
 

Poodles

I play with fire
Jul 22, 2006
16,757
0
0
43
Fort Worth, TX
Straight exhaust back to a straight through muffler, yep, gonna drone like mad. Add a resonator (though in the place of the cat might not be the ideal place for sound or clearance...)
 

Flateric

New Member
Mar 26, 2008
946
0
0
Calgary, Alberta, Canada
I also fought the drone and hate it. The only option for me was to swap my test pipe out and replace with a resonator since I do not have space for it elsewhere in my system. Not the best location for it that is true, but it still helped a little. Not sure about your stutter though.

---------- Post added at 12:55 AM ---------- Previous post was at 12:54 AM ----------

Perhaps your wastegate spring strength isn't setup correctly in your boost controler if you have one. Since that is right about where mine sorta stuttered until I went in a configured the controller properly for the correct spring strength. Tru-boost from AEM is the unit I am referring to.