hey guys i had to swap a 7mge into my car. the ECU and wiring harness is for a auto tranny,my car was originally a turbo 5sp but i blew my motor, so to keep my car on the road while im rebuilding my 7mgte i did that swap. the engine starts but it wont stay on. if you start the car and open the throttle slightly the car cut out, but if you give it wot it'll run for 20 seconds or so then shuts off. im reading in the manual tonight and going to keep troubleshooting tomorrow. If any one has dealt with a similar problem any input would be helpful,
thanks
thanks