Eman Ultimate on a 1j ??

[Yakuzastinger]

I have an eman U here going on a stock 1j mk3 mods to come of course

i have been reading for days and days on info on both forums and i have found some ecu pinouts but not exactly what i want

The eman i have has a 1j plug n play harness but the pinouts in the Eman U install guide are not matching up the harness. Such as the knock wire is not going to the knock pinout on the 1j. I also have some question about the jumpers.

Has anybody got this working on a 1j? i have seen bishops 7m setup and lot of 2j info but 1j info is limited.

 

[cruzinbill]

im still getting around to getting mine, been busy with work crap lately but been doin alot of research. here is what i found that should work well straight from greddy. http://www.greddy.com/img/PHP/products/pdf/806.pdf scroll down to page 24. t-10

 

[daneyan]

i set my jumpers in my emu but i haven't put it in the car yet so i don't know if i set everything right but i think i did. got some help from some of the guys on here as well as hamsmk3 on supraforums. hit up hamsmk3 on supraforums.

 

[Yakuzastinger]

i have got all the greddy manuals checked the pinout on SM vs greddys both seem to match.

Big problem i ran into is there is a quick connect harness on this Eman but greddy does not make one for the supra 1j make on for all the other 1js but not the supra.

Sat down for hours chasing wires and the Eman plugs are wrong and missing wires so I pulled all the pins out and started from scratch. Also cut up the plug and play harness it was all wrong and some of the header pins were broke off.

So now the jumpers were giving me trouble I can set because I know how I will wire the Eman I am still looking for a PnP harness for this though. Also would like input from those that have a 1j running an Eman.

 

[daneyan]

i have got all the greddy manuals checked the pinout on SM vs greddys both seem to match.

Big problem i ran into is there is a quick connect harness on this Eman but greddy does not make one for the supra 1j make on for all the other 1js but not the supra.

Sat down for hours chasing wires and the Eman plugs are wrong and missing wires so I pulled all the pins out and started from scratch. Also cut up the plug and play harness it was all wrong and some of the header pins were broke off.

So now the jumpers were giving me trouble I can set because I know how I will wire the Eman I am still looking for a PnP harness for this though. Also would like input from those that have a 1j running an Eman.

got my pnp harness from www.boomslang.us. just call them and tell them what engine and harness u have and tell them it's for the eman ultimate. i got one made from them for my jza70 harness for $200, took 4 days to make and ship out.