EDIT* FIX INSIDE Searched, but can't find these connectors

[veedubin]

Looking to get the last few wire connectors put together so I can start this thing finally. I'm having trouble with 2 of them that I can't find mates for. Both are yellow, one is a male end, 4 spade terminals; other is a female end 5 pin style terminals. I can't seem to find thier mates, and I am thinking that something should be plugged in there....

Edit* forgot to mention, these are located between the strut tower and the fuse block, drivver side of vehicle and it's an 87 turbo 5 speed.

FIXED!​

The two plugs in question are meant to be plugged together. the square plug with spade terminals is on the JDM harness. the rounded pin style plug is american. I ended up making an adapter harness for it from the remains of the USDM & JDM wires i have. now I have power to everything that needed it.

 

[veedubin]

Anyone? I was looking again this morning, and no avail.

 

[rpm_racing]

Hi, I'm new to the forum, just got my 89 mk3 turbo. About 2 weeks ago just looked out at my car and I have the exact same connectors not connected to anything. Don't know if this helps, or if anyone does know where these are supposed to go.

 

[veedubin]

Hi, I'm new to the forum, just got my 89 mk3 turbo. About 2 weeks ago just looked out at my car and I have the exact same connectors not connected to anything. Don't know if this helps, or if anyone does know where these are supposed to go.

Thanks for the insight, I will be (god and kids willing) starting my car today. It seems as though I'll be attemting to start it without these connectors in place. We shall see what happens.......

 

[veedubin]

Fixed see above