Door Locks and Windows not working after harness work

[dslocal]

So I removed all the wiring harnesses in my car and I have just reinstalled them and the only thing not to work is the power door locks and the windows.
I have a feeling I didn't hook up a ground or something.(yes they are plugged in and they worked before)
Anyways just wondering if anyone has any insight on this.
(specifically where ground D and G would be located:icon_bigg)
Thanks

http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=094

 

[hvyman]

d s at j/b no.1 set bolt.

http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=96

 

[dslocal]

actually looking at that wiring diagram I realized that one 30a fuse provides power to both of them so I will check that tomorrow, guess I should have looked better before I posted

---------- Post added at 09:56 PM ---------- Previous post was at 09:54 PM ----------

Hey thanks man^