crank pully

[Supracharged88]

i couldnt find this anywhere in the site but does anyone happen to know the torque specs for a 1jz CRANK PULLY BOLT thax.

 

[tlo86]

i kind of wonder if its anything near the 2jz's.. i'll search

 

[tlo86]

oh it says T=3300 (KG*CM) which is 243ft lb converted. the exact same as a 2jz was wondering what are you using to take your crank pulley off? or what did you use

 

[aznwaterboy]

I used a impact wrench to take off the bolt, and there's a special tool you need to take off the actual pulley. Luckily a friend near me had one.

 

[annoyingrob]

Taking off the crank pulley, do you have the motor in the car still? If so, put a breaker bar on the bolt, rest the handle on the ground, and crank the motor with the starter a few times. It'll break the bolt loose.

As for a special pulley removal tool:

I also cut a small metal plate, put two holes in the sides, with long bolts screwing into the pulley. I put a socket on the crank bolt, had the plate resting on it, and as I tightened the bolts in the plate, it would pull the pulley off.

 

[JustinGotA1j]

My motor was in the car and I just got under it while it was on the hoist and used a big bastard of a screwdriver and pried it off nice and gentle. Came off pretty easy.