cps wiring + wire harness HELP!!!!

[nthilavan]

okay here is my newest trouble.. the wires from my wire harness broke from the connector to my cps.. so my friend had a junk wire harness and he cut the conector off for me.. however all the colors are different..the colors on the new gray pug are red,blue,yellow,black. the cps colors are red,green,brown,brown. wires from the wire harness are red,brown,black and black. i have no clue.. need car up and running soon cause my tip permet ends this week..

---------- Post added at 06:22 PM ---------- Previous post was at 06:21 PM ----------

oh and its and 86.5 turbo..

 

[modmonster2008]

If you havent cut the harness from your CPS, match up the two harnesses together so that they look like their facing the same direction (e.g. put them next to each other so looks like the harness is facing one direction) if you know what i mean, then just splice one wire at a time and solder it that way the color may be different but the connectors still go to the same spot.

 

[nthilavan]

well the problem is the wires broke off the old connetor from the wireharness..so mainly i just need to match the wirehaness to the cps.. but have no clue about any of the wires

 

[whitemike]

Search!

http://www.google.com/#sclient=psy&hl=en&q=cps+wiring+site:supramania.com

 

[nthilavan]

thanks for the advice.. guess my wires were the same color they were just so dirty that the yellow looked brown and the blue and turned to green.. so double checked em at the ecu and the were red,blue,black and yellow.. put a tester on em to double check.. and not they are hooked up and car runs good..