Control on aftermarket cooling fans

[RWHP]

Hw do you control your aftermarket cooling fan/fans? If not through a EMS, do you use a thermostat? Hope that I could use one of all the OEM conectors to control the fan. Hpe you know what I mean

 

[foreverpsycotic]

I use just a simple on/off swich. I let the motor warm up without them on, then flip the switch.

 

[mmarkk]

I use the stock 7M wiring/sensor+ an extra flexalite thermostat for safety.

 

[Spaniard]

pep boys sells a thermostate and relay kit to connect the hayden electric fans they sell. i have been using the kit for over a year now and it control boths fans with no problem what so ever. they kick on and off by themselves and keep coolant temps. in check.

 

[tlo86]

what fans are you using?

 

[RWHP]

At the moment I only use a 14" fan, but i will probably get a 10" fan that runs all the time.

 

[tissimo]

spal fan controller

http://www.spalusa.com/fans/automated/accessories/fanpwm.html

 

[Evilempire1.3JZ-GTE]

I use the perma cool 3000 cfm 9.6amp fan and a 10amp friendly 160 deg perma cool switch but now that I have wolf V500 it will do all the fan control.

 

[Andre]

For 1JZ are 2 JZ

Just use the 7M temp sensor on the waterneck from the 1/2JZ

Weld an bung tap an hole and scew the temp sensor :icon_bigg