bought new master cylinder and slave cylinder, installed them and work for a week or so now the clutch padel has little pressure could still shift but doesnt feel right bleed the system a couple times but the same, feel spongy could i have bought a bad clutch master cylinder.
clutch master cylinder bad
- Thread starter ma70turbo
- Start date
My clutch is doing the same thing, i havent replaced anything yet, but i have bled the line a few times but thats only a temporary fix, try checking the lines to see if they have a leak, thats what my next plan is
has fluid not leaking at all check fluid everyday, pedal only comes back half way and then have to use foot to pull it the rest of the way back.
mines doing the same thing and I changed the master and slave about a month ago. With mine there is lots of pedal pressure from the floor to about 2/3 the way up but sometimes the pedal gets stuck and i have to pop it up the rest of the way with my foot
sounds like you need to bleed it better. Bleed the slave cylinder itself. Compress the slave cylinder under the car by pushing on the clutch release fork and compress the slave all the way, open bleeder, close bleeder, let it come back out, and repeat. Ive found that ive needed to do this on new slave cylinders on some cars when air might be trapped in there somewhere and doesnt come out with regular bleeding