Ok just back from the track. Autobahn cc. did the north track and all went well until I started pushing hard and using 100% of the car. The brakes got hot and I'm on stock pads and rotors using super blue brake fluid. It has a Great boiling point. But in the end I over heated the Pads and from there It gets Really really strange. My pedal gos to the floor but I still have some brakes. I got the fronts so hot that the rears had to take up the slack, then They got hot lol. I tried to bled the brakes but the pump 3 times and hold didn't work that well, the pedal was still soft and drops real far. the front pads are kinda low but not much lower then what I started with. Is there something I must do with the abs system like in some fords or do you think the master cyl is shot. After the first day I Bled them and Got some feel back and then I did the south track today and same thing happened but now there is no air in the line and still drops to the floor. I gotta pump them to stop. also the rear brakes are new well they were:sarcasm: I don't ask that much but plz help. and In the past the vac bleder don't work for me.idk