Has anyone found a good aftermarket replacement for the clips mounted onto the back of our moulding? Toyota has the caps which are inserted into the holes in the door panels, but they show no part numbers or anything on the clips themselves. If no aftermarket replacements for the clips exist, would just using a good quality (say 3M double-sided trim tape) tape hold it securely? Most of the clip on my doors have given up the ghost and the trim is coming off. Thanks...
Body Moulding Clips & Caps, Pre-89
- Thread starter mirage83
- Start date
I think this might be them but I would double check your dimensions and compare it to this one
https://www.amazon.com/PartsSquare-...coding=UTF8&psc=1&refRID=7D2RKJNGRA0FGWBGB76Y
The clip you need might be at the bottom of this page
https://www.toyotapartsdeal.com/parts-list/1987-toyota-supra/side-moulding.html
https://www.amazon.com/PartsSquare-...coding=UTF8&psc=1&refRID=7D2RKJNGRA0FGWBGB76Y
The clip you need might be at the bottom of this page
https://www.toyotapartsdeal.com/parts-list/1987-toyota-supra/side-moulding.html
No problem. I also wanted to update this thread and let you know that I was at AutoZone and they had a section with small packages of clips in the isle and I saw one that said Toyota body clips which also looked similar as to what you might be looking for. You only get 2 and the price was about $6.
debrucer
Supramania Contributor
I would not install with ONLY double-sided tape, but, I will use it for the final installation... with all clips and the bolt and nut on key locations.
