blinkers dont work

[zachm611]

hey everyone, i just recently changed the orings on my fuel injectors and i accidently touched the alt. with the ratchet and blew the fuse...i started putting tail lights back on my supra since its prob not going to get painted for a while now, i just want to be able to drive it, mine as well im paying insurance on a car i cant drive, its running pretty smooth now after a lot of work, mainly electrical and hardwiring a lot of things just to get it to run i bought it not running, but now that its running pretty good the blinkers dont work, i turn the hazards on and they work? so why arent the blinkers working. could it be because the alt fuse is blown? or is it something else, i have a new fuse just not much time to work on my car since i have busy work schedule. any help is appreciated. thanks and sorry for the long post,

Zach

to make things short.. my blinkers dont work but my hazards do. any suggestions?

 

[slidebabyslide]

http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?Section=BE&Page=17

 

[futeki_supra]

check the fuses,
and what happened to me ( and alot of others that I have read )
was the hazard switch was actually unplugged

 

[akito]

so are u saying that when u press the hazard button it works, but not when u try to make a turn with your signal lights?? If thats the case then check the SIGNAL fuse in the fuse box to the left of the driver side. Hopefully this helped.

 

[zachm611]

hey everyone i figured it out, it was a blown alt. fuse thanks for the help.

 

[Nick M]

Next time, remove the ground from your power source, and that won't happen.

 

[Fletch124]

One thing that you should get used to is unplugging your battery when you work on your car.

 

[zachm611]

lol yes i know about unplugging the battery i just wasnt really thinking, i usually do it but i didnt this time.