Hey guys,
i just want to confirm exactly which wires go where . having trouble finding any information online!
thanks alot!
---------- Post added at 07:32 PM ---------- Previous post was at 07:29 PM ----------
I currently have it setup as :
black - EQ1 power ground
red - +B EFI main relay
green - IGF igniter
yellow - NE cam position sensor
it turns on, but rpm just fluctuate between idle - 2000ishrpm when i step on the throttle - i messed with all the settings on the bee*r too
where did i go wrong?
---------- Post added at 07:42 PM ---------- Previous post was at 07:32 PM ----------
switched around yellow and green and it works
i just want to confirm exactly which wires go where . having trouble finding any information online!
thanks alot!
---------- Post added at 07:32 PM ---------- Previous post was at 07:29 PM ----------
I currently have it setup as :
black - EQ1 power ground
red - +B EFI main relay
green - IGF igniter
yellow - NE cam position sensor
it turns on, but rpm just fluctuate between idle - 2000ishrpm when i step on the throttle - i messed with all the settings on the bee*r too
where did i go wrong?
---------- Post added at 07:42 PM ---------- Previous post was at 07:32 PM ----------
switched around yellow and green and it works