i was told by my mechanic i needed a new vehicle speed sensor. So i told him i would save him time by jus buyin the part he ordered to put in since he was busy doing a motorswap.
My friend and i lifted up the car and tried to replace this small peice that seems to spin at a certain point. We tried to release the tranny mount near the end of the transmission but two bolts were rusted and probly placed in there because of poor labor. My question is if i release this plate under the rear of the transmission would it drop the transmission to the ground or would i be able to place this little metal elbow in place so my speedometer will work? :1zhelp:
My friend and i lifted up the car and tried to replace this small peice that seems to spin at a certain point. We tried to release the tranny mount near the end of the transmission but two bolts were rusted and probly placed in there because of poor labor. My question is if i release this plate under the rear of the transmission would it drop the transmission to the ground or would i be able to place this little metal elbow in place so my speedometer will work? :1zhelp:
