auto accelerator pedal adjustment.

[yongai27]

im not sure if the mt accelerator pedal is different than the at, but i did an at to mt swap and the pedal in the at has a whole bunch of slack. is there a way i can raise the accelerator pedal?

 

[modmonster2008]

Same pedal, there is an adjustment nut I believe at the throttle linkage assembly on the valve cover, find the one coming from the firewall and adjust it away from the linkage i believe that it pulls the pedal higher away from the ground, thats how i did it!

 

[yongai27]

Same pedal, there is an adjustment nut I believe at the throttle linkage assembly on the valve cover, find the one coming from the firewall and adjust it away from the linkage i believe that it pulls the pedal higher away from the ground, thats how i did it!

am i supposed to adjust both nuts or just one ?

 

[modmonster2008]

I would just adjust one, pulling the cable away from the linkage i believe, just see what adjustment needs to be done to pull up the slack from the pedal, and tighten it down

 

[yongai27]

ok that sounds easy enough. thanks!