aftermarket turbo oil return line

[xms]

Anybody have a link where I can buy any aftermarket turbo oil return line?

 

[ForcedTorque]

I believe driftmotion sells a braided steel one. I need to check into that one as well.

 

[xms]

I believe driftmotion sells a braided steel one. I need to check into that one as well.

could'nt find it must be another site:1zhelp:

 

[ForcedTorque]

I searched too, and all I could find was this flange. I'm assuming you would run braided line with a -10AN fitting from there. If I come across more I will update.

http://store.driftmotion.com/index.php?sid=1478a540fbaeba

 

[cuel]

Check this one out: http://www.supramania.com/forums/showthread.php?t=43802

Hard line upgrade, by one of our vendors in the misc. section. Enjoy

 

[xms]

Check this one out: http://www.supramania.com/forums/showthread.php?t=43802

Hard line upgrade, by one of our vendors in the misc. section. Enjoy

That a nice article, but what i meant to say was the return line or drain tube coming off from the turbo itself and going to the oil pan.

 

[ms07s]

What? Like this?
http://www.suprasport.com/CT26-Easy-Install-Kit_p_216-691.html

I beleive MDC and Driftmotion do or did sell the same thing.

 

[xms]

What? Like this?
http://www.suprasport.com/CT26-Easy-Install-Kit_p_216-691.html

I beleive MDC and Driftmotion do or did sell the same thing.

yup that's it is there othere products just like that, but cheaper?

 

[ms07s]

Cost less?......Not that I know of that will fit the ct26. In truth you are paying for the adaptor flanges for the ct26 and block more than the lines. But look at it this way; it deletes the ristrictive banjo bolt and is flexable for easy install and removal of the turbo.

 

[Piratetip]

I purchased mine from Rabidchimp, good guy to work with.
http://www.rabidchimp.com/mk2sup_rcp_ct26oillines.htm