OK so first off i am new to using a multimeter so bear with me>>
I found a huge boost leak in my intercooler pipe off of the turbo fixed it too much boost...
then i found a hole in my wastegate vacumm line should fix the over boost prob right....
so i put everything back together and boom out of nowhere code 31...wtf
barely stays alive dies if you give it gas
So far i have tested
power in to the afm and i have 4.9 volts !!!!!!!!!!!!!
I now my connection is good and have messed with all the wires !!!!!!!
so i took the afm electronics out put it in my house that is 68 deg. for a day and tested ohms on the 200k setting i got 2.3ohms which is way off
i just wanted to make sure im using/reading the meter correctly before i purchase a new AFM
I found a huge boost leak in my intercooler pipe off of the turbo fixed it too much boost...
then i found a hole in my wastegate vacumm line should fix the over boost prob right....
so i put everything back together and boom out of nowhere code 31...wtf
barely stays alive dies if you give it gas
So far i have tested
power in to the afm and i have 4.9 volts !!!!!!!!!!!!!
I now my connection is good and have messed with all the wires !!!!!!!
so i took the afm electronics out put it in my house that is 68 deg. for a day and tested ohms on the 200k setting i got 2.3ohms which is way off
i just wanted to make sure im using/reading the meter correctly before i purchase a new AFM
