AC fan pulley - help!

[Keros]

Hey guys, I have myself a tidy problem...

Somehow I lost the pulley that was supposed to be mounted on the bolt in the linked images below.

I was hoping someone could tell me what all goes on that bolt so I can get my AC running again. I looked high and low for some kind of parts information or even a picture of one complete, but I couldn't find anything detailed enough.

Thank you in advance for any help you guys can provide. I don't know anyone with a Mk III Supra, or I'd have just looked under their hood

http://img293.imageshack.us/img293/2900/dscf0923rz8.jpg

http://img291.imageshack.us/img291/2460/dscf0924zt8.jpg

http://img355.imageshack.us/img355/4749/dscf0925hy5.jpg

http://img355.imageshack.us/img355/2556/dscf0926sl1.jpg

 

[Keros]

Shameless bump.

I should note that it was "lost" while going down the highway.

I've called Central Autoparts (the parts supplier for most auto shops in the city) here in calgary, and they said there's no such thing as a belt tensioner for an 89 supra, atleast not one that's listed in their system.

Thus, I'm assuming it's a generic pulley then, but I don't know the outer diameter of the pulley, ect.

After looking over https://www.1sttoyotaparts.com/partscat.html , I couldn't find anything related to the actual components on the belt system to drive the compressor, but only the compressor and beyond.

It's such a mundane problem that the solution is no where to be found.

Is it worthwhile to take it to a Toyota dealership?

 

[pb92supraturbo]

See following link, reference part #88595. You'll get the entire pulley assembly which bolts to the bracket in question.


http://www.cygnusx1.net/Supra/Library/EPC/291420/catalog.aspx?Figure=8719&Page=1

Shameless bump.

I should note that it was "lost" while going down the highway.

I've called Central Autoparts (the parts supplier for most auto shops in the city) here in calgary, and they said there's no such thing as a belt tensioner for an 89 supra, atleast not one that's listed in their system.

Thus, I'm assuming it's a generic pulley then, but I don't know the outer diameter of the pulley, ect.

After looking over https://www.1sttoyotaparts.com/partscat.html , I couldn't find anything related to the actual components on the belt system to drive the compressor, but only the compressor and beyond.

It's such a mundane problem that the solution is no where to be found.

Is it worthwhile to take it to a Toyota dealership?

 

[Keros]

doh!

Didn't think to look in the electronics parts :cry:

thanks pb92supraturbo, that's pimp.