A disconnected hose? (7M-GTE)

[SUPRASTEVE]

Well when we changed the starter we went through hell!
when we started the car for some reason it ran like crap so i checked the hoses the one next to the coil packs was disconnected and and the on to the intake manifold by the firewall was on the floor so i connected both.
But I found another hose with a clip attached that connects to a medium sized hose.
I think it came off when we pulled out the starter at the begining...
Does anyone know exactly where this hose can go?
The car runs pretty good but the turbo is a lil slugish
and it ran perfect before the hoses came off.
So any ideas?
If you guys with 7m-gte can please look where the hose with the orangy yellow clip goes I would very much appreciate it
THANKS SUPRA GUYS!!!

-SUPRASTEVE

 

[Mk3runner]

picture would be nice... maybe its the egr line.. thats near the starter.

 

[pmohr]

The vacuum line that runs between the T and the boost sensor/cruise control has a clip on it to secure it to the brake booster line. What size is the line you have? Same as the line for the charcoal canister?

 

[SUPRASTEVE]

The vacuum line that runs between the T and the boost sensor/cruise control has a clip on it to secure it to the brake booster line. What size is the line you have? Same as the line for the charcoal canister?

Well I will take a picture right now so it can be easier for you guys to see the hose is about 4inches...
I will take a pic of the engine and the hose!:naughty:

 

[SUPRASTEVE]

ENGINE PIC

STARTER AREA PIC (this is where I think the hose came from) BLURY OPPS!

HOSE PIC(these are the hoses that fell off)

Here is where one hose goes but where does the cliped one go?

 

[SUPRASTEVE]

P.S. That last hose where my finger is pointing that one is going to the intake manifold to that T shaped hose by the fire wall. :icon_razz

 

[Mk3runner]

damn, don't know what to tell you on that one.. best thing to do is get a vacuum diagram and make sure all the lines are there. that would be my approach at least.

 

[pmohr]

What year is yours? I don't see any clip like that in the EPC.

 

[SUPRASTEVE]

What year is yours? I don't see any clip like that in the EPC.

Mine is a 1989 TOYOTA SUPRA TURBO TARGA 5SPD its the one that looks more like the 90-92

 

[pmohr]

I'd double check, but I can't seem to find a single clip that looks like that - http://www.cygnusx1.net/Supra/Library/EPC/Figures/MAB027B.gif

IIRC, the only vacuum line that has that diameter is the brake booster line, that would fit into the bottom portion of that clip. Other than that, maybe one of the heater hoses? Those have roughly the same OD.

Those are the three locations to first check (brake booster line, and both heater hoses), at least that's what I would do but I don't much 7M experience (or Supras in general, for that matter).

EDIT: BTW, here's pics and vids of Merlyn's motor, I hooked up all the vacuum lines short of the PS idle up, EGR VSV, BVSV and charcoal canister, and that whole vacuum gallery BS underneath the intake manifold. http://picasaweb.google.com/boredMDer74/Supra

 

[SUPRASTEVE]

I'd double check, but I can't seem to find a single clip that looks like that - http://www.cygnusx1.net/Supra/Library/EPC/Figures/MAB027B.gif

IIRC, the only vacuum line that has that diameter is the brake booster line, that would fit into the bottom portion of that clip. Other than that, maybe one of the heater hoses? Those have roughly the same OD.

Those are the three locations to first check (brake booster line, and both heater hoses), at least that's what I would do but I don't much 7M experience (or Supras in general, for that matter).

EDIT: BTW, here's pics and vids of Merlyn's motor, I hooked up all the vacuum lines short of the PS idle up, EGR VSV, BVSV and charcoal canister, and that whole vacuum gallery BS underneath the intake manifold. http://picasaweb.google.com/boredMDer74/Supra

I think I am going to have to lift the car I think it is under there.

 

[Mk3runner]

thats the best way to get to the vacuum lines under the intake.

 

[SUPRASTEVE]

thats the best way to get to the vacuum lines under the intake.

yeah for all I know its just there somewhere...
watch as soon as i life it it'll take awhile but I will find it and then my lil turbo slugishness will go away.

 

[Big Wang Bandit]

Is it a wastegate hose?

 

[SUPRASTEVE]

Is it a wastegate hose?

Hmm you know I never really checked that side of the engine let me go check! :biglaugh:

 

[SUPRASTEVE]

It appears to me that i am missing yet another hose the one that goes to the big black thing in the top left corner where the turbo is but i dunno where it would go i will get a pic asap

 

[SUPRASTEVE]

See that little thing sticking out i think that is missing a hose i forget what does that black thing do because its comeing from there.

That black thing with the 2 hoses what is it?
not only that look you might see the lil thing sticking out i felt it it needs a hose i think.

This is just to show you all where it is I am talking about

The more i look at it I think the hose is cut =(
what do i do?

 

[suprahooked]

That black thing is a charcoal cansiter and that hose by the turbo is a vent, theres a little hole in the frame rail to put it in.

 

[SUPRASTEVE]

That black thing is a charcoal cansiter and that hose by the turbo is a vent, theres a little hole in the frame rail to put it in.

Yeah my dad told me not to long ago we checked it out opps sry bout I think I will have to lift the car...

 

[SUPRASTEVE]

We are going to lift the car at my uncles house we will let all you guys asap laterz