99% there

chuckmuska2005

New Member
Dec 3, 2007
265
0
0
37
canton
My 1jz is nearly running perfect, there are no engine codes but the engine still runs rich. I start the engine and the afr's start at mid 13ish and drop. my setup is one walbro on switch, 440's and afpr set to 35psi on single turbo setup. I don't know what else to look at. Any thoughts?
 

GotTurbos?

2J = Here; Swap = Near
Apr 24, 2006
951
0
0
35
Dallas, TX
Did you pull fuel? Also even though it isn't going to help your problem at the moment, bump your fuel pressure back up to 43-45 psi, or it will never run right on a stock 1j ecu.
 

chuckmuska2005

New Member
Dec 3, 2007
265
0
0
37
canton
When i had 550''s in it i initally didnt pull anything. I have the neo pulling -6 at 500 and -11 at 1000, I will increase pressure. thanks for the quick response, much appreciated!!!