Could I use this turbo on my supra. Or is it to big. Also how hard would it be to bolt on if it will work.
97 dodge cummins turbo
- Thread starter Supraboy89
- Start date
I sold an HX40 off of a new 8.9 Liter Cummins or C series to a guy who changed exhaust housings and ran it on a KA24DE in a 95 240 SX and made 528 rwhp and 430 rwtq @ 30 psi and was a great street turbo. The aftermarket housing was a .63 a/r and a T3 flanged based housing made by a Bullseye performance company I think. The Dodge Ram turbo off the 5.9 B series is an HX35 which is a little smaller but has been run on MKIII's before. Talk with MDC in Indianapolis,In about this.
These are both T3 based flanges and could be bolted on with a Greddy TD06 adaptor if you can find one or make your own out of an inch thick piece of steel.
Sean
These are both T3 based flanges and could be bolted on with a Greddy TD06 adaptor if you can find one or make your own out of an inch thick piece of steel.
Sean
Last edited:
i have a holset HY35 on my car.. full spool at 3500rpm. no dyno numbers yet.. i bought the turbo modded as a bolt on kit from Jon M. from MDC Motorsports. couldnt be happier with the kit. you can get the hx40 or he351c exhaust housing and that has a 4" v-band outlet. if you use one MAKE SURE you go external waste gate one way or another! i had wicked boost creep. good luck!
