God damn a year of work and it all payed off:icon_bigg Well the car is still coming along good and I still can't wait for our supra's to go for that ride.Now next spring my car go's under the knife:naughty:
88 Supra - Project 1J
- Thread starter OneJArpus
- Start date
MK3.0dudeman;1369075 said:
Funny looking back at this i realized what you just said.
FYI our cars did go at it. I kicked his ass. But knocked right after ahhahahaha! Funny i've owend 2 7M's not 1 knocked, i get a 1j and it knocks.
Guess what its time to go 1.5JZ now so i will continue this thread once i take more measures. But for now i'll leave you with this.
damn thats a sexy 1jz looking threw this whole thread makes me want to go 1jz still not sure yet though...:evil2: great build thats the ultimite sleeper.....
No real big updates but here's so far.
On the tow truck going to my boys house in teaneck
At its swap location with the sw20 sitting behind it.
Had a little helper today when assembling the engine hoist & stand. Thanks little buddy lol
On the hoist finally, couldn't be on the stand cause i didnt have the proper bolts to mount it.
Toyota for life
more pictures and updates through out the week.
On the tow truck going to my boys house in teaneck
At its swap location with the sw20 sitting behind it.
Had a little helper today when assembling the engine hoist & stand. Thanks little buddy lol
On the hoist finally, couldn't be on the stand cause i didnt have the proper bolts to mount it.
Toyota for life
more pictures and updates through out the week.
Update*
ripped apart the GE block sorry for not taking any other pictures forgot my camera and had to use my phone =/
On the pallet
And now on the engine stand. Almost fully disassembled. Head, oil pump, and oil pan will come off soon. Going to rip out the 1JZ this weekend. Wish me luck lol
my boy robin taking off the waterpump
Figure i'd give this a try for my IC maybe my radiator and my other coolers
Anyone need a 2JZGE head? Intake manifold? Cams? PM me will sell pretty cheap
ripped apart the GE block sorry for not taking any other pictures forgot my camera and had to use my phone =/
On the pallet
And now on the engine stand. Almost fully disassembled. Head, oil pump, and oil pan will come off soon. Going to rip out the 1JZ this weekend. Wish me luck lol
my boy robin taking off the waterpump
Figure i'd give this a try for my IC maybe my radiator and my other coolers
Anyone need a 2JZGE head? Intake manifold? Cams? PM me will sell pretty cheap
Last edited:
Sat 9/19
Started to disconnect and drain all fluids.
Quick pic of the y pipe
IC piping and rad disconnected
work area is a drive way with a blue tarp and some rags, tools, etc
After a long break got back to work
Getting ready to pull the motor and forgot the DP is still on *DOH*
Peto pic of me while disconnecting the down pipe haha! - Had to stop at 9PM wifey had to head back home for something so i ended the day there
Sunday 20th - resumed by taking off the nose cone and bumper
Started to disconnect and drain all fluids.
Quick pic of the y pipe
IC piping and rad disconnected
work area is a drive way with a blue tarp and some rags, tools, etc
After a long break got back to work
Getting ready to pull the motor and forgot the DP is still on *DOH*
Peto pic of me while disconnecting the down pipe haha! - Had to stop at 9PM wifey had to head back home for something so i ended the day there
Sunday 20th - resumed by taking off the nose cone and bumper
My boy Robin cutting a zip tie that help some of the speedo cable in place - up and out!
Almost there
Ahh, there
No heart
More updates as the week goes, time to tear down the 1j and get machine work done and put it on the 2j.
Ah im excited for the 1.5jz.. Im going to be doing the same thing eventually.. I can't believe that your 1j got rod knock...
Guess i'll let the cat out of the bag. Look what i picked up last night. THANKS CHRIS AKA ICEBERG
Master Power T61 T4 flange .68 AR rear
Master Power T61 T4 flange .68 AR rear
iceberg319;1413067 said:
Yea
I'm happy now just need a manifold and the rest of my parts and this car should be done for the supra meet. Hopefully we can throw your wideband on it to see what A/R's are looking like. I also need to find 550 injectors and use my resistor to wire them up. Do you still know how to do that? LOL
Me ready for paint
Painted the IC and Koyo Rad. Kinda ran outta paint so i couldn't do all the fins on the Koyo as you can still see the logo on there.
2JZGE Block Taken completely apart
Empty engine bay, getting sanded, scuffed, and cleaned
http://s856.photobucket.com/albums/...or Swap Pt2/?action=view¤t=100_2370.jpg
Before!!! - reminder
After!!
Painted the IC and Koyo Rad. Kinda ran outta paint so i couldn't do all the fins on the Koyo as you can still see the logo on there.
2JZGE Block Taken completely apart
Empty engine bay, getting sanded, scuffed, and cleaned
http://s856.photobucket.com/albums/...or Swap Pt2/?action=view¤t=100_2370.jpg
Before!!! - reminder
After!!
My nephew smiling at me and saying TIO what is that? lol
New goodies as well to compliment my drewgo manifold
Cam seals, braided p/s line, braided fuel line, battery tie down, oil catch can, 1jz gasket for lower runner, bolts for valve cover gaskets
Last edited: