7mgte Timing: Correct me if I'm wrong.

[oheylnaishca]

So this is my 1st time doing this. Correct me if I am wrong.

1. Remove Cam Position Sensor.

2. Adjust your crank and cam shafts. Crank shaft should be marked at 0 degree or TDC. Use a screwdriver to monitor movement.



3. Put the timing belt back on. (=

4. Adjust cam position sensor according to the inner grove.

 

[Nick M]

What is wrong? Engine timing is wrong? If the engine timing is wrong, the cam position sensor doesn't need to come out until the engine timing is correct.

 

[CajunKenny]

You're wrong. Dead wrong!


What are we talking about again...?

 

[oheylnaishca]

ok so I did do the timing first, then I did not start the car. 2nd step I did was adjust the cam position sensor according according to the TSRM. I'm going to be checking it with the timing light soon.