7mge clutch fork pic needed

[sas'd7mge]

I just bought a release bearing, bearing retainer and the 2 clips that hold it all on to the clutch fork. I did not take it apart...I just bought a bellhousing and clutch fork so if you have a pic showing how the clips are installed, please post it up or email me. j_perret_83@hotmail.com thanks for any help! PS. I looked at my haynes manuel but it isn't very helpful when if comes to the clips

 

[sas'd7mge]

Bump. I figured out the clips...they just seemed too small but they work. How about the position of the throwout bearing? There's a metal spring/clip that goes half way around the bearing. Does this metal piece sit in the u part of the clutch fork, or does it go from onr tip of fork to the other on the outside?