60-1 on a 1jz?

drewgo

drewgo

Akuna MaTata...!
Dec 1, 2006
482
0
0
South florida
If the price is good. Go for It's. It's a smaller turbo so your not going to be too laggy although you will experience lag, but the .81 backhouse pushes you through redline.
I know cuz I have a similar set up except I have a T70 with an .81 back. Just my experiece.
 
daneyan

daneyan

Banned
Sep 1, 2005
441
0
0
40
South Florida
i was told that i had a 62-1 on my car but it turns out it's a 60-1 t4 .68 ar exhaus housing. spool is pretty good. i'm running 10lbs right now and hit full boost by 3k rpms. but i don't have a tubular mani. i have the c&n y shaped manifold so it's like 3 cylinders each fill 1 runner of the manifold. i guess that helps with quick spool. the car has no top end though. other mods are os giken clutch. blitz sbc, stock fuel that's why the boost is set so low, 4'' intake and full 3'' exhaust.
 
Last edited:
Van Diesel

Van Diesel

Powered by vino
Dec 12, 2006
396
0
0
El Paso, Texas
It's not really the compressor side he should worry about. It's the proper sized exhaust that he needs to get. I've seen 60-1's with P trim 1.32 exhaust housings....I'd like to see a 1JZ spool that. And then there's the B18 honda's running 60-1's with o-trim .84 housings.
 
tissimo

tissimo

Stock is boring :(
Apr 5, 2005
4,238
0
0
41
Melbourne, FL
how is a 60-1 too small for a 1jz? seriously explain to me why



fwiw, the deal on the 60-1 fell through and I'm just going to put my 67 back on the 1jz with a 3L bottom.. so forces me to get a 71+ for my 2j when I do go single :)
 
OneJoeZee

OneJoeZee

Retired Post Whore
Mar 30, 2005
5,721
0
0
39
aboard the Argama
tissimo said:
how is a 60-1 too small for a 1jz? seriously explain to me why



fwiw, the deal on the 60-1 fell through and I'm just going to put my 67 back on the 1jz with a 3L bottom.. so forces me to get a 71+ for my 2j when I do go single :)
Click to expand...

This is Ric we're talking about. If your turbo isn't capable of 700+hp, it's too small.:biglaugh:
 
tissimo

tissimo

Stock is boring :(
Apr 5, 2005
4,238
0
0
41
Melbourne, FL
OneJoeZee said:
This is Ric we're talking about. If your turbo isn't capable of 700+hp, it's too small.:biglaugh:
Click to expand...
lol yea, but really want to see his responce to the question on his reasoning its too small..
 
OneJSupra

OneJSupra

I'm a sleeper ...
Feb 9, 2007
900
0
0
Supraland
OneJoeZee said:
That wasn't the point.

You FL guys have your mystery 1300hp 1J car anyway, so what does pushing the limits matter anymore?
Click to expand...

Yeah I'm aiming to have at least 1khp on my 1J. Uhmm, Maybe a TWIN Holset turbo should do it....LOL.

Seriously though, if 60-1 is too small so what is the ideal size without blowing up the engine. I like to know myself so I know when I go single.
 
tissimo

tissimo

Stock is boring :(
Apr 5, 2005
4,238
0
0
41
Melbourne, FL
when going for big power, just start out with a better platform.. Yea big power can be made on the 1jz, it can be made on a geo 3 cyl engine... but reap the benifits of having a better platform to begin with imo..
 
You must log in or register to reply here.
Top Bottom