Okay so i just bought a 3 piece spoiler and in the middle of painting it. I am going to be doing minor filling and sanding, priming and painting it, but i want to get the LED strip off does anyone know how to get that off? thanks
3-piece spoiler LED question
- Thread starter modmonster2008
- Start date
First - search! You're gonna get that a lot with questions that have obviously been answered before. You can't honestly think you're the first person to ask this here.
The LED assembly is held in place with a single screw that can be found in the center support of the rear spoiler. Remove the rear spoiler and stick a flashlight into the hole in the center support. You'll see a phillips head screw in there. Remove that and the LED assembly will slide right out - along with the trim panel. The trim panel is held on the LED assembly with a few screws... but I'm sure you can figure that out as soon as you see it.
Keith
The LED assembly is held in place with a single screw that can be found in the center support of the rear spoiler. Remove the rear spoiler and stick a flashlight into the hole in the center support. You'll see a phillips head screw in there. Remove that and the LED assembly will slide right out - along with the trim panel. The trim panel is held on the LED assembly with a few screws... but I'm sure you can figure that out as soon as you see it.
Keith