2jzgte vvti swap

[aveo900]

Ok guys so my 7m is done with and well I wanna swap it :naughty: I want to know how to do it myself I have some mechanical experience and can some one explain how to turn an auto to manual an r154

 

[mjsn1]

you should find everything you need here:
http://www.supramania.com/forums/sh...ur-1JZ-GTE-And-2JZ-GTE-Swap-Guide-For-Dummies

Its the same as a GTE but the wiring is probably different.

 

[Mr Bojangles]

you should find everything you need here:
http://www.supramania.com/forums/sh...ur-1JZ-GTE-And-2JZ-GTE-Swap-Guide-For-Dummies

^That and 6-7k should get you where you need to be

 

[aveo900]

Thanks

 

[aveo900]

What about the auto to manual swap ???

 

[Sly-0ne]

What about the auto to manual swap ???

Is your toyota auto or manual?
To mate r154 with 2jz. Your going to need a 1jz bell housing.
Driftmotion has them around $300..?
Also, clutch set up, flywheel and driveshaft.
Driveshaft from turbo supra w/r154...

 

[planemos]

http://wilbo666.pbworks.com/w/page/42173082/2JZ-GTE VVTi JZS161 Aristo Engine Wiring

 

[MINA]

^hay link is amazing

 

[Supra800]

Hey I have 90 supra mt car and I did the 2jzgte vvti swap and I keep hitting a false rev limiter around 4500, what wires for the ecu do I have to hook up to make the car drive? Please help

 

[jesse_rc1991]

if its anything like the 2jzgte non vvti the you would ground the NSW and STA wires. Others have had this problem and doing this usually solves it for them. Look at Wilbo666 for your ecu pinout to find out which wires these are for your vvti

 

[Supra800]

Ok thanks I'll try that and updat y'all

 

[Supra800]

My ecu doesn't have a nsw so what but I grounded out the P and N and STA but still no change

 

[jesse_rc1991]

so I assume you grounded B2 pin #13, F59 pin # 26, and F59 pin#2 to a good ground. my next guess would be prolly power F59 17 which is D maybe it will tell you your in drive and work. also have some theorys with pin bf2 pin2 and bf3 pin3

 

[Supra800]

This is my pin out can you tell me what to use from this

http://wilbo666.pbworks.com/w/page/42173082/2JZ-GTE VVTi JZS161 Aristo Engine Wiring

 

[jesse_rc1991]

This is my pin out can you tell me what to use from this

http://wilbo666.pbworks.com/w/page/42173082/2JZ-GTE VVTi JZS161 Aristo Engine Wiring

I just did. that's where I got the pin #'s from. F59 pin#17 is the indicator for the drive gear to the computer, according to wilbo

 

[atmperformance]

he might need step by step instructions, unbolt driveshaft, unbolt trans bolts, remove carrier....

 

[Supra800]

I did that with the pins and car still won't rev, and is running rich at idle

 

[jesse_rc1991]

you ran battery power to F59 pin#17?

 

[Supra800]

Yes

 

[Supra800]

Can you guys tell me what wires shoulda bin hooked up the pin #s and all, act like I'm starting with an untouched harness that was extended