[1GGTE] Searching rod bearings - need help....

Neo-52

New Member
Aug 24, 2008
9
0
0
France
Hello everyone, I'm French and currently in possession of the only French Supra with a "1GGTE".

Unfortunately, the engine suffered from a lack of oil on one of the connecting rod bearings, and I find no pieces in France, England or USA ...
All the dealers I know tell me that this pieces are discontinued...

So I called upon the aid community "Supra" in order to get back on the road my dear car ....

I need a new set of connecting rod bearings, the engine being a 1GGTE gen3 1992. (cranshaft bearing diameter 84mm)
Toyota references are: 13041-88341-04 (ideally -04 but it can also be -03 or -05 taker).

There are also connecting rod bearings in "Japanparts" ref: CB1433A

If any of you could either help me find a supplier or to the intermediary and send them to me, I assure you it would be greatly thanked ...

Neo-52
neo52@orange.fr
 

Neo-52

New Member
Aug 24, 2008
9
0
0
France
Exact, the crank shaft journal diameter is approximately 44mm, and the inlet diameter of a rod is approximately 47mm...
 

hvyman

Dang Dude! No Way Man.
Staff member
Apr 17, 2007
12,568
1
0
Fullerton,CA
There smaller than a 7m.

I would try calling around to countries where the 1g was available. Also having the part numbers would likely help out.
 

Neo-52

New Member
Aug 24, 2008
9
0
0
France
hvyman;1999978 said:
There smaller than a 7m.

I would try calling around to countries where the 1g was available. Also having the part numbers would likely help out.

The Toy part numbers are in the first post: 13041-88341-04
And the "Japanparts" part numbers: CB1433A

Thanks
 

Neo-52

New Member
Aug 24, 2008
9
0
0
France
Thanks alls !!!

Archon, could you see in russia if you could have the parts in toyota dealers, or in others dealers ??? (the numbers are in my precedent post)
Thanks for your help.

Spikeophant, did you know some importers which are ables to send me this parts ???
 

Neo-52

New Member
Aug 24, 2008
9
0
0
France
Archon find me the toyota bearings (in russia), so I'll attempt to have them in my hands and after I'll closed this topic.

Thanks for your help !!!!
 

Neo-52

New Member
Aug 24, 2008
9
0
0
France
This topic could be closed, I received the rod bearings today !!!!

A very big thanks to Archon for his help !!!!