aem

Car = 87 7MGTE on AEM v1, DH61 igniter on stock coils Does anyone know the voltage on the wire that comes from the igniter to the Tach? I had read that the turbo tachometers received a 12 square wave signal, but I get nowhere near 12v when I volt test the tach wire on the DH61. ( or what...

Hey guys, I picked up an 87 turbo about 6 months ago as a new project. I’m getting ready to pull the engine and strip the car down to get it into the body show and get it painted. I have some issues that I want to take care of before I tear it all down so that I know the car runs good as a...

Alright, I know I'm going to get a ton of hate mail for bringing this up, but hear me out. I've got quite a fun project here. I've got an 88 GTE engine, "running" off a 2JZ-GTE AEM. I had a custom harness made for supposed "plug and play" applications. Needless to say, the car won't start...

I recently bought a AEMv2 for my 1JZGTE and i wanted to know what sensors do i need to be able to tune for 450-500HP @20psi? Ive been told by arron that the stock 1jz IAT sensor can work and IF i dont plan on making more then 14psi i can use my stock 2jz map sensor but ive used my car at...

Hey, I traded some parts I had for an AEM 30-1130 Standalone ecu for an 89-up 7mgte but my car and harness is a 1987 turbo. I would love to trade straight across for someone with a AEM 30-1110 for the 87-88 supra, but since that is unlikely to happen, I need to make an adapter to make it all...

I've searched all over for information pertaining to using the AEM F/IC on the 7M, and I've found next to nothing. The only half informative thing I found was on AEM's tech forum where someone was asking how to get it to work, then followed up with something "my car is running now, thanks AEM...

i have run a aem in my 90 for years and tuned well. i rebuilt my engine, wired in 2 5 volt sensors, and reinstalled aem. I put my cal file back in and the car crancked. it ran for about 3 to 4 minutes and died. the ecu was dead and disconnected. The engine wont crank again for 15 minutes...