Search results

Hey all, looking for the 2JZGTE equivalent of this sticker. (Not just the vacuum hose routing section, which is easy enough to find on google.) I'd like to get a sticker made up for my MZ21. Thanks very much, Ash.

Hi all, I know there is a bit of info out there on using an LS400 fan clutch and 7M fan when doing a 1/2JZ swap into an A70. I know Driftmotion sell a modified LS400 clutch with thinner oil. I have a new LS400 clutch on my 2JZ and decided to try a thinner oil to reduce the off idle jet...

Hi all, I have an MZ20 Soarer with an Aristo 2jz/A340le conversion. Currently it has an elcheapo universal intercooler/plumbing kit installed which I despise because: Firstly the hot side runs through the original air cleaner intake hole next to the right head light necessitating the need...

Hi all, I'm trying to find out whether any of you are running pucked clutch disks with the stock (though machined obviously..) flywheel and to what effect? I am unsure what compound is used on the clutch disk I have, it's an ACT 6240607 which is their sprung centre 6 puck disk. How will it...

Hey guys, If any of you out there are in the process of rebuilding your r154, while your doing it do you mind getting a couple of measurements for me? I'm trying to confirm whether or not the 1st gear and corrisponding clutch hub are identical across all r154's Toyota spares said they...

Hey guys, I'm at the point in my build where i have to order the copper head gasket.. Engine has the following, Ross pistons, Copper O-ringed block, Standalone ignition/fuel control, 57 Trim running 16-18psi.. now the stock compression ratio is 8.4:1 so i presumed i should get as...

G'day all, I'm investigating the abilities of the bolt on Turbonetics 60-1 turbos available for the mk3 supra. These include the: CT26, 60-1 Hi Fi, Stage 5 (500hp) CT26/T4, 60-1 Hi Fi, Stage 3 (400hp) CT26/T4, 60-1, Stage 3 (400hp) as found on the HPF site here -...

G'day all, I'll keep this short and sweet, I'm looking at getting a new turbo, i want it to be bolt on so i don't have to get a custom exhaust manifold and can keep my 3" dump pipe. My engine in going to be rebuilt, ie. new bearings, mhg, forged pistons and i'll have a few little...

Title is self explainatory, If so i have some questions regarding the injector/coil wiring. Cheers all.

G'day guys, My new 7m is basically ready to go back in the car, I'm just at the stage of putting back all the vacuum hoses and bits of piping. As I’m going with a standalone computer and don’t want to use 3 of my 4 aux outs for the ISCV I’ve removed it and the connecting hoses. This has led...

G'day all, Alas yes, she isn’t a Supra, though those of you aware of the Z20 Soarers will most likely know that they in fact share the same chassis as the mighty A70's and as such also share the same mighty engine and gearbox combinations, Just a little bit of background on the car, I...

G'day guys, I've began preperation for the installation of my EMS, it came with a complete loom and an EMS 3 coil ignitor, I unwrapped the standard loom today and did some labeling/wire tracing. It all looked like it should be pretty straight forward. My question though is, Because i...

CAn anyone with a similar set to this give me a rough figure of what sort of power to to expect. Engine rebuilt 20,000kms 20 thou Ross forged pistons O-Ring and Copper gasket install Performance Valve springs 3” intercooler 3” exhaust 550cc injectors and a 255 walbro...

Ey guys, I'm trying to rebuild my 7m affordably, and due to some nasty scoring on the pistons it looks like I won't be getting out of it without boring the cylinders and replacing the pistons with some oversized items. I really can't afford to get some forgies, though I’d like to...

Hows it going everyone, I'm in the process of a BHG replacement, along with a mild head/block rebuild. I have already removed the head and pretty much everything else connected to the block bar the gearbox, What i want to do is, Attach the block to a block and tackle via the standard...

Hey guys, Only new here, but very stoked theres a 7m specific forum, i look forward to having a good read through it all and am sure it will become a vital recourse of mine. So i hope you don't mind that i don't actually have a Supra :icon_razz I picked up an mz21 a few months back, and...