I have recentley swaped a 1jz into my 89 from a 7mge. My tach dosent work and I seen the driftmotion sells a MSD tach adapter. I was wondering if there was a way I could get the tach to work without the tach adapter?
Thanks for the help guys finally got her running, got some things left to do before she is lurking the streets of orlando but she's running, thanks again don't know what I would of done without all the info from supramania...
Ya I know about the 2 under the dash we got that but are having trouble with this one. How did you do it and where did you find the info/pinouts to do it?
I have one half still in my front clip connected to the fuse box,and the other in my car connected to the engine harness. Does it have to be plugged in? and if so what do I splice it in to?
Me and my dad have finished up extending the engine harness and are almost done with the swap but I cant find any info on the igniter plug, I have a feeling that im just not wording it right when I search but anyways do I have to swap the body harness from the 1j clip to my car or is there a way...
I live in orlando too and used to go to a little meet on alafaya every wednsday but have not gone for about 6 months do to spinning a rod bearing in my 7m I dont know if they still meet up there but I should have my 1J swap done soon and ill check it out.
Good news I got it mounted in there woot! and I have to say I like the stealthness of it. Come to find out the a/c lines are routed quite a bit differently in the ma70 compared to the jza70, and the support for the hood latch is shaped differently as well. So I swapped the support bar and...
I plan on buying the DM front mount kit but later down the road. I have other things I need to invest my money in like a drive shaft, boost gauge and controller, as well as other miscellaneous things. Was hoping to be able to put off getting a new intercooler and just use the stock until I am...
I am in the process of wrapping up my 1jz swap in my 89 and i cant seem to remember how the stock intercooler mounts up. I didn't even think to take a picture of the mounting setup before I removed it from the front clip, and I cant find a picture of a stock setup anywhere. I would be very...
Its been awhile since I posted anything but the time has come. I have an 89 supra with a 7mge that I beat on it a little to hard and spun a rod bearing in it. I originaly planed on just repairing it and doing a NA-T but didnt have the funds so she sat for awhile. After getting a new job I...
ive been busy the last 2 days and didnt get to touch my car. but i talked to a few guys at a meet and they said im better off just rebuilding the whole engine or just doin a swap. ive been wanting to do a 1j swap but i need to save up some money only got 1500 saved so far so it will be a little...
I have a 89 7mge and i spun #1 bearing. I then replaced the rod bearings in hope of a quick fix but of course that didnt work and i spun #1 again now i am wondering is it cheaper to have the crank and rods sent to a machine shop or buy a new crank and set of rods. Also where would be a good...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.