Search results

To line up the cams you need to pull the front timing belt cover off and on the back timeing belt cover (theres a front and back timing belt cover), you need to have the 2 little notches on the cam gears lined up with the 2 notches right above the cam gears on the back timing belt cover. you...

It will be above the rear differential just to the left of center of it.

Where is the fuel return line located back by the tank?

So that's what's been causing all those problems all along? I checked to make sure all the wires were in the right place. ---------- Post added at 11:41 AM ---------- Previous post was at 11:39 AM ---------- And devin your saying with shipping it would be $30? Pm me devin when you can.

heres the other video where you can really hear what its doing.http://youtu.be/tuEkcTB6j_o

I fixed the injector leak but i still have a problem with it missing and choking out at high rpms (around 4600-5500).http://youtu.be/FVBSMq0gepI ---------- Post added at 11:44 PM ---------- Previous post was at 11:41 PM ---------- So your saying the bigger injectors is whats causing all the...

And the distributor is from an 89.

I did check for codes and it didn't show any. I will be uploading the videos in a little bit. But it stalls out and chokes at high end rpms. And I did check the tps and it all checked out good but that doesn't mean it isn't bad. ---------- Post added at 06:36 PM ---------- Previous post was at...

I will definently get that tomorrow. I have to get this figured out cause it's drivin me nuts. I'm thinking it's the injectors messin up cause the injectors are for a 7mgte cause they are solid black. Maybe the injectors ARE shot or the throttle position sensor. The reason for me saying that is...

Need some help with this guys

Ok. Back to square one. I fixed the o-rings and a couple of them were shot. The car runs smoother and better but it still has a stutter miss and acts like it's choking. What now?

I went to oreillys and got them for 16. I'm almost bettin that's what the problem is though.

Well here's an update. Sorry I didn't get the video yet but while the car was running yesterday I pulled the clips off the injectors one at a time and they all seem to be working. But I took a can of throttle body cleaner and sprayed around the injector while it was still running and when doing...

ok ill try and get that done tomorrow. I noticed earlier today when i was looking at the motor and at the injectors that the clip that holds the injectors securely are broken. i mean the plug is still there just that little clip that you have to push to get it off of the injector is broken...

Ok I'll have to do it tomorrow cause i won't have time tonight

Come on guys help me out here im ready to get this thing running right so i can start building it and i cant get it figured out.

well ive heard of people taking wire and strapping them securely to the fuel rail and then doing it. im running out of ideas and its getting me really aggravated as to what it could be. So whatever causing the sputtering, missing and stalling please help me figure it out.

well devin on may way to work last night i was sitting at the stop light and my car stalled out and died and i went to the gas station and while i was there (and at home earlier that day) i popped the hood to make sure all my hose clamps for the new line were still all good and i didnt have any...

I was wanting to know where to find the part numbers on the injectors that came off my 7mge. and how to tell the difference between the high and low impedence(is there a color difference or something). And how can you tell if the injectors are bad(like the ohm resistance or what and what the...

yeah im about 30 mins or so from there. why you ask? And i have a quick question, If i had an injector leaking (like the o-ring went bad or something) would that be causing me these problems????? the reason i ask is because today i made sure all my new clamps were tight and that there...