Search results

Haha, I took more detailed pics of the wires that I thought were important. I remember the 7mgte had the alternator up top and high, but the 1jz is down low. From the looks of it it isn't even done , so people who have done it before a 1jz swap is what as far as wiring goes are you just...

My friend had a few problems with a speed shop so he took the car from there and brought it to me. I don't know much about 1j swaps into Supra's so bare with me I've taken several pics of the connectors while going over some diagrams, but still I'm a little confused because some colors don't...

Fully review these systems. It will drive 12 injectors high impedance sequentially. I put money that the oem 1gz use a multicoil waste spark ignition. Yes a Motec could possibly drive 24 injectors through an expander, you could more than 2 injectors per driver, but what are you...

You are just taking the cylinder heads as ''large'' OHV engine don't have heads like DOHC , so they won't be as large. You do not need two ecu's to run this engine you can use one. ESPECIALLY if you're talking about M800 series from Motec they can drive 24 injectors alone.

Straight 6 engines have a perfect balance they cancel out vibrations and don't have to use balance shafts to counter act them just like a V12 engine. This allows it to use lighter internal parts. Being a V or I engine holds little weight it's the inherent design. Then there is packaging that...

85 horsepower wouldn't have done it that bike can trap 130mph+ he would be putting a constant distance on you. If you can do 125mph that can be happening.

Where do you get these service manual pictures? Is it the online TSRM manual site and does the tolerances listed in the manual change in other years?

3500 lbs even at 395 you still wouldn't be with that bike.

Yeah you're right I checked that out.

Still the same I believe.

Yeah it's gonna be torn down, rebuilt with Eagle rods and Wisecos and turbocharged. 2jzge's have 1 coil for their distributor.

He has to buy another Mk3 first he sold his shell, but I'm gonna create logistics for this project well get the parts first then the car.

This picture is the one I took last night. No ECU on with it but the engine is complete. The seller had a 1jz SC300 and he left this engine sitting outside for a month so it's pretty legit he said he really needs to get rid of it I bet if it was plugged back up it will run still, so I called...

There's suppose to be dowel pins and threaded holes for bolts on a flywheel you can get bolts anywhere grade 10 or better.

Glad your son likes it.

You feel... you feel like giving it to ME!

^ Let me have that tranny please. (I'm serious)

Clutch and Pressure Plate

I was using that supertech stuff the other day as a flame thrower burning some spiders. :biglaugh:

Thats weird I made the same or more power than you did and I didnt break anything. Quit killing your trannys.