Search results

I have been working on this issue for several weeks now and have exhausted all resources. 1988 N/A Chassis, 7MGE, R154, Yellow Plug 7MG (M/T) ECU - the ECU has a large sticker that says AU if that matters. -3 different coils (from working cars) -2 different ICM's (one grey plug, one green. I...

Calling on my local buddies in Hampton Roads!!! Since some of you don't respond to phone calls or texts, I'll put this here. I'll be needing just a little help (not much really) on the new Supra in a few weeks, maybe some parts to borrow just to get her to the Meet. I'm closer than I thought...

Ok, pretty much done with this section. I will add stuff as necessary. Comment away! -1.5jzgte Build/Swap Basics Note: Most of this info can be pulled from both the 1jz and 2jz swap parts lists, but I am bringing all of the other scattered pieces of information into this as well. This is to...

I have searched and have not found anything on Google or SM, could just be the tapatalk app isn't so good with searching.... Has anyone done a soft line SS setup with the stock ct12's like the kit driftmotion has for the ct26? I am asking because my twins came with bent lines for Turbo and...

Updated this post as of 3/10/11. Responses to myself are in bold. ********************************************************************** Ok, After much searching and picking up pieces here and there, I figured I would throw out ideas and see what answers I get. None you fool. Ok, I...

Hey guys, wanted to invite anyone who games via PC for MW2 or BFBC2 to come have some fun with me and my clan, RDH (Rabid Dogs of Hell). We're always looking for friends/players worthy of being friends that make the game worth while. We may also be playing alongside HOC (Heroes of Combat), which...

Found this on the MR2OC Forums http://mr2oc.com/showthread.php?t=365171&highlight=2010+meet

Before we begin, this is not another 'H0w much PoWeRz can I make 0n a l33t 7m??!!'. I know around where I should be. And I know what I have done, and how to get to the power level I want. But first, specs: Rebuilt 87 7mgte. Slightly higher compression ratio (roughly 8.8:1 or so, would...

I can't find this anywhere, but what size and thread are the bolts that bolt up to the stud on the bottom of the motor mounts, and secure it to the chassis? I lost mine, and I want to get new ones from Lowes so I can actually drive it without worrying about the back and forth torque-ing.

Ok, since every time someone has asked for help it appears the thread never gets answered. So I am going to ask again since I still have no answer. I have a stock, brand new oil psi sender. Turbo gauge cluster in an 87 n/a chassis. All my gauges work fine, minus the oil pressure gauge. I let the...

Some of you may remember my 89 2jz build. Well, that ended because I gave up and moved on. Too many issues. Part of me was happy that I did, and part of me still kicks myself, but we all live and learn. As a follow-up on that thread, she runs well. I wish the future owners the best and hope she...

Ok, so I am currently searching for rims that are nice looking and affordable. I like 5-spoke rims with lips, but I have not made a decision yet. So far my finds are: 1) MSW Type 14 17x7 in the front and 17x8 in the rear 2) MSW Type 16 17x8 all around 3) Enkei Performance EV5 17x7 all...

So who has any good ideas on how to screw in interior pieces when one does not have the screws the pieces came with? Or, for example, if the door sill screws are stripped out? I want to start putting my interior back together, but I am at a little bit of a loss... :aigo:

Well, she runs! :love: Soundslikesemi87 came over and did my walbro install (I'm was being lazy. Thanks man!), and I got the tranny/DS bolted up. We had to adjust the cps, but she cranked right over. Now timing is set perfectly and she sounds healthy. Minus the blown turbo of course. lol I do...

Ok, so I finished my n/a chassis with a gte swap. Now I need a good oil cooler system. I have read the sticky and I really like the remote oil cooler idea. Here are my planned parts and prices: 1) N/A filter stud - No cost, have one laying around 2) Perma Cool 111 adapter. $12...

Ok, so after a nice semi-long build-up (yes, there will be a thread with pics once she runs), I have come to a halt on my progress. The only issues I have left to fix seem to not be so simple. The transmission is .5" too far back, which keeps me from bolting up the carrier bearing for the DS...

Hey guys, I need pictures of 86.5-88, 89, and 90-93 7mgte engine harnesses on the ecu connector side. I need to see what I do and don't have as well as location, color, etc... My 87 gte harness has a few extra connections that are not plugging up anywhere in my 7mge chassis....

Ok, I am currently tracing down issues on why my car has no CEL, gets fuel at first but the pump stops when I crank it over, yet it still gets spark and ignition. I have found an 87 ecu pinout and I am taking a multimeter to it to determine if and when I have power. This 87 harness is a...

Ok 87 na chassis with a rebuilt 7mgte. I have some wiring that needs to be completed. Minor pieces. I believe I have it right, but I want to make sure.

Out of all that I have learned, I do not know exactly which systems are necessary and which aren't. Obviously, they all serve a purpose, but for now I need this car driveable at least until next friday afternoon when I can add whatever things I am missing. BTW: 87 7mgte in an 87 n/a chassis...