Search results

Looking for ideas here realy hope it's not a worst case thing here There's no coolant splatter under the hood so there's no where else from it to come from other than the head between 3-4 cylinders Here's the photo Motor was rebuilt done 8+ hours dyno time and maybe 500kms on the road

http://www.youtube.com/watch?v=4O4FvNOnU2A just a small vid roads are a bit greasy at the moment to get any moving vids

http://www.youtube.com/watch?v=oqDoGpIaBoM&feature=youtube_gdata_player It's not exactly a new vid but haven't seen it here before

Hi was just trying to find some info on the os triple clutch as I have just put a triple plate in my 7mgte/r154 supra Now I bought both of these untested from japan the clutch look like it was ok Now have it running and it's dam noisy have been told they were when you depress the clutch and...

Trying to set up my new clutch does anyone know if the ma70 r154 clutch master cylinder is different to a ga70 non turbo one in size? They looked they same and didn't swap them over when went from w58 to r154 yes silly in hind sight but I was Being lazy and the ga70 looked cleaner Already...

Wanting a little insight from people using multiplate clutches and push pull converters I'm having alot of trouble with my os tripple plate push pull converter r154 It's real difficult to get in to gear like using 2 hands and yanking difficult so I tried adjusting the push pull converter went...

well after far too long the time finaly came and it runs :) first start up :) http://www.youtube.com/watch?v=7kciYmvAycU first stage of dyno tuning 280rwkw at 12.5psi http://www.youtube.com/watch?v=tiJ7P6UkJrY car goes back on the dyno on monday try to get another 100kw :) will get a...

Hi well after the dramas trying to get my car going its about that time to have another go at starting it I will quikly summarise what happened first *motor rebuilt forgies mhg arp's proper machining ect *was primed with oil with a remote pump then keyed over to try make oil pressure not...

My motor may still be a mystery but if I do get it going atleast I know I can stop it :) still gotta get new hub rings and change my brrake lines to suit but still yay! :)

Now I know a few people on here have done this though searching I keep finding posts saying "it preaty mush bolts up" "easy just mod a few things" Now I have just bought the mk4 4pot fronts with modified hubs to suit so obviously I would love to have the rears to match so what exactly do I...

right long story short I have a built 7m currently with a w58 box and a spec stage 5 clutch wich is ment to be on the way to me (orderd 2 monthes ago from sip still not here) I now have been given the oppertunity to either sell my w58 conversion for $1000nzd and buy an r154 conversion for...

ok tryed embedding that failed lol heres link untill I fix it http://www.youtube.com/watch?v=cPjIFG1vZMghttp://www.youtube.com/watch?v=cPjIFG1vZMg

well my freshly built motor had another surprise for me today. not only did it not make any oil pressure so has not been started I was also blessed with this when I when to drop the oil yay for me what a wonderfull day. motor has officaly 0mks on it has not even been started or...

hey my 7mgte has a fresh rebuild ect was down at the workshop getting my ecu installed among other things. Now the problem is they were ment to start it up check things over then put it on the dyno before it got finished off. as they should they wanted to build oil pressure among other pre...

I just bought a wes beech alternator bracket and it doesn't line up is it because it was made for a different alternator or just machined wrong? I have asked him too but im after a quick reply the people building my car have sent me away to go see if I can buy a new alternator that fits or im...

Hey I just got my self a figlass stout hood now when I put it on yesterday I noticed ti had no holes to attach the gas struts. The indentation is thers so I could drill the hole but then what would be my best option to attach them glue a nut in the hole for the strut to thread in to? I...

I will start by saying im sorry I know this has been asked probably about 4billion or so times but flame suit on I will ask away :icon_bigg Ok I have a $100NZD(so maybe the price of an expensive pair of boxers) pos chicktiy china 50mm HK$ wastegate which nerves have got the better of me so...

Hey I have one of the ss manifolds with a 40-50mm hks wastegate flange and a 50mm nock off hks wastegate (yes im sure the not the best but thats not the issue atm) What I want to know can I mount the wastegate on the manifold with the thin metal gasket that it comes with will that seat...

http://www.youtube.com/watch?v=xpPuHlTnEJQ F$%kn tools:)

So I thought I would try and be cleaver and do the I/C pipes myself with a universal kit and here is what I managed to come up with before I got to p$%t off and left the garage Any one have some suggestions of a better way of running these pipes? I so wanta ffim! I should also mention this...