Search results

There's just something about an MR2 G1 sitting right next to an MKIII... damn sexy. :love:

I did pressure test the system. We found one other hose near the turbo that was leaking other than the top hose. We still went ahead and replaced the bottom hose as well for safety concerns tho. How many times do I need to pressure test this system? (I guess the obvious answer is "Until it...

Now I'm pissed. I go to start the car up this morning and the radiator coolant light comes on after a few weeks of all clear. I get out, pop the hood, and the reservoir bottle is nearly empty again!!! I had it topped off after the thermo gasket was put back on and once more for good measure, and...

That's why I drive a Jeep when it snows/heavy rains. I can drive in all kinds of weather, but I can't trust Joe Blo nearby to be able to do the same. I like heaping snow around my car when it snows heavy so that if some A-rod is driving too fast in the parking lot and swerves, all he gets is an...

Sorry to resurrect my old Code 52 rod knock thread, but this is important. After much searching, I found a VERY IMPORTANT pic of an engine bay that outlines EXACTLY where the rod knock sensors are and had to bring it to the forefront and post it here for everybody to see. As you can see...

LOL, I shoulda been more precise. :icon_razz

Except these are post 89+, and mine are pre89+. The lenses are darker in the Japanese JZ factory taillights unlike the USDM ones. Plus I get the middle piece that matches the lenses instead of the older middle piece that matches the body color. It'll make it stand out more.

Double bar with lit center. Don't like the circles. Would LOVE to do my Supra with my new JZ taillights (once I get these...) AND LEDs. Would look secks-C.

For a 7m, look to checking and replacing all old, cracked hoses, run a compression test, leak test, check the CEL for error codes, check the block above and below for fluid leaks, check the LSD in the back for leaks, ask questions like... "When was the brake pads last done/replaced?", "When was...

Just checkin' to see if you and the Supra are still alive. Haven't heard much from you. Give me a call soon!

Here's what the logo looks like on a sweatshirt.... Can't wait for my seat covers now... :naughty:

Question: What sized screws are they? Around here, the PnP's have NO SUPRAS, CRESSIDAS, and very limited access to other Toyotas. Why this place seems to be a black hole for Supras is beyond me. Of course, 3~4 hours east is Hampton Roads, and it seems like everything they have are Toyotas...

This is pure genius. He is basing his entire R&D on the concept of snow being perfectly soft and slippery, not to mention traction on ice. He doesn't even think to consider what happens when the snow ends and the PAVEMENT begins, all during a 5-minute trip to a store, 20-minute drive to work...

http://www.bosozokustyle.com/content/what-bosozoku http://fashion.3yen.com/2008-06-01/bosozoku-fashion/ http://en.wikipedia.org/wiki/B%C5%8Ds%C5%8Dzoku

http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=FA&P=29 Start with this first, then go to the section on electrical wiring diagrams. The sensors should be easy to trace out IF you can follow the diagram. Since I have never installed a full TEMS system, I can't tell you exactly...

It's not something I've heard done completely, since not only do you need the actuators, controller, computer, wiring, dash lights, and shocks, but also the internal sensors on the engine block as well. The wiring diagrams should be available at the cygnus website, and that would give you...

Nice. I want an MKII to go with my MKIII... :love:

DING! That's EXACTLY what I want to do. Not a sticker, but a banner that rolls up properly. How much would something like that cost? NOTE: Want the TRD Motorsports to read properly while looking at it from the back (logo running left-to-right, NOT longways).

Fair enough, so long as you help me rebuild my car for a few months...::toothless::

I'm really sorry I can't give you those 36 seconds of your life back...